Comparative evaluation and patient satisfaction with an electrical impedance-based device versus digital radiography in the estimation of remaining dentin thickness in carious posterior permanent teeth: (Diagnostic accuracy study).

BACKGROUND: Accurate assessment of remaining dentin thickness (RDT) is paramount for restorative decisions and treatment planning of vital teeth to avoid any pulpal injury. This diagnostic accuracy study compared the validity and patient satisfaction of an electrical impedance based device Prepometer™ (Hager & Werken, Duisburg, Germany) versus intraoral digital radiography for the estimation of remaining dentin thickness in carious posterior permanent teeth. METHODS: Seventy patients aged 12-25 years with carious occlusal or proximal permanent vital posterior teeth were recruited. Tooth preparation was performed to receive an adhesive restoration. Pre- and post-excavation RDT were measured radiographically by two calibrated raters using the paralleling periapical technique. Prepometer™ measurements were performed by the operator. Patients rated their satisfaction level with each tool on a 4-point Likert scale and 100 mm visual analog scale (VAS). Inter and intragroup comparisons were analyzed using signed rank test, while agreement between devices and observations was tested using weight kappa (WK) coefficient. RESULTS: the intergroup comparisons showed that, before and after excavation, there was a significant difference between measurements made by both techniques (p < 0.001). After excavation, there was a weak agreement between measurements (WK = 0.2, p < 0.001), whereas before excavation, the agreement was not statistically significant (p = 0.407). Patients were significantly more satisfied with Prepometer™ based on scales and VAS (p < 0.001). CONCLUSION: Prepometer™ could be a viable clinical tool for determining RDT with high patient satisfaction, while radiographs tended to overestimate RDT in relation to the Prepometer™.

Two-year clinical and radiographic evaluation of ACTIVA BioACTIVE versus Compomer (Dyract® eXtra) in the restoration of class-2 cavities of primary molars: a non-inferior split-mouth randomised clinical trial.

OBJECTIVES: The trial aimed to compare the clinical performance and radiographic success of ACTIVA BioACTIVE versus Compomer in restoring class-II cavities of primary molars. MATERIALS AND METHODS: A non-inferior split-mouth design was considered. A pre-calculated sample size of 96 molars (48 per group) with class-2 cavities of twenty-one children whose ages ranged from 5 to 10 years were randomly included in the trial. Pre-operative Plaque Index (PI), DMFT/dmft scores and the time required to fill the cavity were recorded. Over 24 months, the teeth were clinically evaluated every six months and radiographically every 12 months by two calibrated and blinded evaluators using the United States public health service (USPHS)-Ryge criteria. The two-sided 95% confidence interval (CI) for the difference in success rate was considered to assess non-inferiority, and the margin was set at -18%. The linear mixed model and Firth's logistic regression model were used for data analysis (P < 0.05). RESULTS: After 24 months, 86 teeth (43 per group) were evaluated. The mean PI score was 1.1(± 0.9), while DMFT/dmft was 0.35 (± 0.74) and 6.55 (± 2.25) respectively. The clinical and radiographic success rate of Dyract vs. ACTIVA was 95.3% and 88.3% vs. 93% and 86%, respectively. The two-sided 95% CI for the difference in success rate (-2.3%) was - 3.2 to 1.3% and didn't reach the predetermined margin of -18% which had been anticipated as the non-inferiority margin. Clinically, ACTIVA had a significantly better colour match (P = 0.002) but worse marginal discolouration (P = 0.0143). There were no significant differences regarding other clinical or radiographic criteria (P > 0.05). ACTIVA took significantly less placement time than Dyract, with a mean difference of 2.37 (± 0.63) minutes (P < 0.001). CONCLUSION: The performance of ACTIVA was not inferior to Dyract and both materials had a comparable high clinical and radiographic performance in children with high-caries experience. ACTIVA had a significantly better colour match but more marginal discolouration. It took significantly less time to be placed in the oral cavity. TRIAL REGISTRATION: The study was registered at ClinicalTrials.gov on 4 May 2018 (#NCT03516838).

Aesthetic impact of resin infiltration and its mechanical effect on ceramic bonding for white spot lesions.

BACKGROUND: Treating white spot lesions (WSLs) with resin infiltration alone may not be sufficient, raising questions about its compatibility with other treatments amid controversial or incomplete data. Therefore, this study aimed to assess the aesthetic feasibility of resin infiltration combined with bleaching, as well as its potential mechanical effect on ceramic bonding to WSLs. METHODS: One hundred and fifty flat enamel surfaces of bovine incisors were prepared. Ninety specimens were deminerailized and randomly assigned to three groups(n = 30): post-bleaching resin infiltration (Bl-R), pre-bleaching resin infiltration (R-Bl), and only resin infiltration (R). Color, surface roughness and microhardness were assessed in immediate, thermocycling and pigmentation tests. The remaining sixty samples were randomly assigned to three groups (n = 20): control (Ctrl), bonding (Bo), pre-bonding resin infiltration (R-Bo). Shear bonding strength, failure mode, micro-leakage depth and interface morphology were evaluated after ceramic bonding. The Tukey test and analysis of variance (ANOVA) were used for statistical analysis. RESULTS: For the effect of resin infiltration and bleaching on WSLs, the R-Bl group showed the worst chromic masking ability, with the highest |ΔL|, |Δa|, |Δb|, and ΔE values after treatment. Compared with those in the Bl-R group, the R-Bl and R groups showed significant time-dependent staining, which is possibly attributed to their surface roughness. For the effect of resin infiltration on the adhesive properties of WSLs, resin infiltration reduced the staining penetration depth of WSLs from 2393.54 ± 1118.86 µm to 188.46 ± 89.96 µm (P < 0.05) while reducing WSLs porosity in SEM observation. CONCLUSIONS: Post-bleaching resin infiltration proved to be advantageous in the aesthetic treatment of WSLs. Resin infiltration did not compromise bonding strength but it did reduce microleakage and enhance marginal sealing. Overall, resin infiltration can effectively enhance the chromatic results of treated WSLs and prevent long-term bonding failure between ceramics and enamel. Based on these findings, the use of post-bleaching resin infiltration is recommended, and resin infiltration before ceramic bonding is deemed viable in clinical practice.

Current Applications of Artificial Intelligence for Pediatric Dentistry: A Systematic Review and Meta-Analysis.

Purpose: To systematically evaluate artificial intelligence applications for diagnostic and treatment planning possibilities in pediatric dentistry. Methods: PubMed®, EMBASE®, Scopus, Web of Science™, IEEE, medRxiv, arXiv, and Google Scholar were searched using specific search queries. The Quality Assessment of Diagnostic Accuracy Studies-2 (QUADAS-2) checklist was used to assess the risk of bias assessment of the included studies. Results: Based on the initial screening, 33 eligible studies were included (among 3,542). Eleven studies appeared to have low bias risk across all QUADAS-2 domains. Most applications focused on early childhood caries diagnosis and prediction, tooth identification, oral health evaluation, and supernumerary tooth identification. Six studies evaluated AI tools for mesiodens or supernumerary tooth identification on radigraphs, four for primary tooth identification and/or numbering, seven studies to detect caries on radiographs, and 12 to predict early childhood caries. For these four tasks, the reported accuracy of AI varied from 60 percent to 99 percent, sensitivity was from 20 percent to 100 percent, specificity was from 49 percent to 100 percent, F1-score was from 60 percent to 97 percent, and the area-under-the-curve varied from 87 percent to 100 percent. Conclusions: The overall body of evidence regarding artificial intelligence applications in pediatric dentistry does not allow for firm conclusions. For a wide range of applications, AI shows promising accuracy. Future studies should focus on a comparison of AI against the standard of care and employ a set of standardized outcomes and metrics to allow comparison across studies.

Development of short forms for screening children's dental caries and urgent treatment needs using item response theory and machine learning methods.

OBJECTIVES: Surveys can assist in screening oral diseases in populations to enhance the early detection of disease and intervention strategies for children in need. This paper aims to develop short forms of child-report and proxy-report survey screening instruments for active dental caries and urgent treatment needs in school-age children. METHODS: This cross-sectional study recruited 497 distinct dyads of children aged 8-17 and their parents between 2015 to 2019 from 14 dental clinics and private practices in Los Angeles County. We evaluated responses to 88 child-reported and 64 proxy-reported oral health questions to select and calibrate short forms using Item Response Theory. Seven classical Machine Learning algorithms were employed to predict children's active caries and urgent treatment needs using the short forms together with family demographic variables. The candidate algorithms include CatBoost, Logistic Regression, K-Nearest Neighbors (KNN), Naïve Bayes, Neural Network, Random Forest, and Support Vector Machine. Predictive performance was assessed using repeated 5-fold nested cross-validations. RESULTS: We developed and calibrated four ten-item short forms. Naïve Bayes outperformed other algorithms with the highest median of cross-validated area under the ROC curve. The means of best testing sensitivities and specificities using both child-reported and proxy-reported responses were 0.84 and 0.30 for active caries, and 0.81 and 0.31 for urgent treatment needs respectively. Models incorporating both response types showed a slightly higher predictive accuracy than those relying on either child-reported or proxy-reported responses. CONCLUSIONS: The combination of Item Response Theory and Machine Learning algorithms yielded potentially useful screening instruments for both active caries and urgent treatment needs of children. The survey screening approach is relatively cost-effective and convenient when dealing with oral health assessment in large populations. Future studies are needed to further leverage the customize and refine the instruments based on the estimated item characteristics for specific subgroups of the populations to enhance predictive accuracy.

Marginal adaptation of two-step self-etch versus universal adhesives for Class V restorations: Effect of Er:YAG laser vs. bur prepared cavities.

PURPOSE: To compare the in vitro effect of laser and bur preparation on marginal adaptation of Class V cavities restored with a 2-step self-etch and distinct universal one-component universal adhesives used in self-etching mode. METHODS: 96 Class V cavities were prepared with conventional burs or with an Er:YAG laser. Four universal self-etch (Unibond Extra Low Shrinkage, All Bond Universal, SKB-100 and Prime&Bond active) and a 2-step self-etch adhesive (Clearfil SE Bond) that served as control were used to restore the cavities with direct composite. The percentages of continuous margins were evaluated by quantitative SEM analysis before and after a fatigue test consisting of 240,000 occlusal loads and 600 warm/cold thermal cycles. RESULTS: The marginal adaptation of bur prepared restorations was statistically superior to laser-prepared ones. Class V cavities restored with Clearfil SE Bond and the one-component self-etching universal adhesives All Bond Universal and Prime&Bond active presented the highest and statistically similar percentages of continuous margins before and after loading under both bur and laser cavity preparation. The lowest percentages of continuous margins were observed in the groups restored with the low shrinking adhesive (Unibond ELS), with medians of 49 and 21 for bur and laser prepared cavities after loading. CLINICAL SIGNIFICANCE: Class V cavities presented smoother and higher percentages of continuous margins when prepared by bur rather than by laser. The 2-step self-etch adhesive Clearfil SE Bond and 1-step self-etch universal adhesives All Bond Universal and Prime&Bond active showed a comparable marginal performance.

Analyzing working time and efficient caries removal using a novel bioactive caries detecting dye and air polisher prophy for caries excavation: randomised clinical trial.

OBJECTIVES: This study aims to analyze the working time consumed during caries excavation and pain perception while using a novel Bioactive caries-detecting dye solution (BCD), an Air Polisher Prophy and a combination. MATERIALS AND METHODS: Four groups (in each group, n = 20 permanent teeth) were selected from 60 people between 17 and 40 years of age. The study included teeth with occlusal dentinal caries in the molars with cavity entrance sizes of less than 2 mm (clinically and radiographically). Randomization software was used to assign patients to various groups. Group A: Conventional Rotary Drilling, Group B: BCD + Mechanical Excavation (Spoon Excavator), Group C: Air Polisher Prophy, and Group D: BCD + Air Polisher Prophy 0.5 mL BCD was applied with a micro brush to the carious tooth surface for 40 s in groups B and D. After that, radiographs were performed to see if the radiopaque extension was visible. For mechanical caries extraction, a spoon excavator was used for group B, and an air polisher prophy was employed for group D. For mechanical caries extraction, a spoon excavator was utilized for group B. An air polisher prophy was employed for group D. Multiple applications of the BCD were used in the event of residual caries. Working time and pain experienced during caries excavation were registered using the Verbal Pain Scale (VPS) (score 0-4), and caries removal was clinically graded using the modified Scale (score 0-5). RESULTS: The time taken was Group A, Group D, Group B, and Group C, according to statistical analysis using ANOVA and the Post Hoc Test (275.02, 403.8, 461.98, 615.41 s, respectively). Group A had the highest mean VPS (1.85), whereas Group B had the most minor pain (0.6), followed by Group D (1.2) and Group C (0.6). (1.45). Group C (2.35), followed by groups D (1.75), B (1.30), and A (1.30), had ineffective caries eradication (0.90). (p < 0.05). CONCLUSIONS: compared to group C, groups B and D took less time and had less/no pain while excavating caries. Compared to traditional mechanized caries removal methods, the chemo-chemical BCD can diagnose and aid in successful caries removal with minimal pain. CLINICAL RELEVANCE: The outcomes of the present study demonstrated that the chemo-chemical bioactive caries detecting dye solution has the potential to identify and help in effective caries removal before mechanized caries removal methods.

Clinical evaluation of posterior restorations over wet and dry dentin using an etch-and-rinse adhesive: A 36-month randomized clinical trial.

OBJECTIVES: To evaluate the clinical performance of posterior restorations over wet and dry dentin with an etch-and-rinse adhesive after 36 months of clinical service. METHODS: Forty-five participants were recruited, each one had at least two posterior teeth that needed restoration. Ninety restorations were placed on Class I or Class II cavities. For the restoration protocol, a simplified etch-and-rinse adhesive (Adper Single Bond 2) was applied over wet (WD) or dry dentin (DD) and later restored with a bulk-fill composite (Filtek Bulk Fill) under rubber dam isolation. Each restoration was evaluated using the World Dental Federation (FDI) criteria after 6, 12, and 36 months of clinical service, regarding the following principal restoration characteristics: postoperative sensitivity, marginal discoloration, marginal adaptation, fracture of material and retention, and recurrence of caries. Kruskal Wallis analysis of variance rank (α = 0.05) and Kaplan-Meier survival analysis were used for statistical analysis. RESULTS: After 36 months of clinical evaluation, no significant difference between groups was observed in each FDI criterion (p > 0.05). Twenty restorations (WD=10, DD=10) showed minor marginal staining, and twenty-two restorations (WD=11, DD=11) presented small marginal adaptation defects (p > 0.05). Four restorations were lost (WD = 2, DD = 2) and the fracture rates (95% confidence interval) were 94.9% for each one, without significant difference between wet and dry dentin (p > 0.05). SIGNIFICANCE: The degree of dentin moisture does not seem to affect the clinical performance of a simplified etch-and-rinse adhesive in posterior restorations when the adhesive is applied vigorously over the dentine surface.

Enhanced remineralisation ability and antibacterial properties of sol-gel glass ionomer cement modified by fluoride containing strontium-based bioactive glass or strontium-containing fluorapatite.

OBJECTIVES: This study aimed to compare two types of bioactive additives which were strontium-containing fluorinated bioactive glass (SrBGF) or strontium-containing fluorapatite (SrFA) added to sol-gel derived glass ionomer cement (SGIC). The objective was to develop antibacterial and mineralisation properties, using bioactive additives, to minimize the occurrence of caries lesions in caries disease. METHODS: Synthesized SrBGF and SrFA nanoparticles were added to SGIC at 1 wt% concentration to improve antibacterial properties against S. mutans, promote remineralisation, and hASCs and hDPSCs viability. Surface roughness and ion-releasing behavior were also evaluated to clarify the effect on the materials. Antibacterial activity was measured via agar disc diffusion and bacterial adhesion. Remineralisation ability was assessed by applying the material to demineralised teeth and subjecting them to a 14-day pH cycle, followed by microCT and SEM-EDS analysis. RESULTS: The addition of SrFA into SGIC significantly improved its antibacterial property. SGIC modified with either SrBGF or SrFA additives could similarly induce apatite crystal precipitation onto demineralised dentin and increase dentin density, indicating its ability to remineralise dentin. Moreover, this study also showed that SGIC modified with SrBGF or SrFA additives had promising results on the in vitro cytotoxicity of hASC and hDPSC. SIGNIFICANT: SrFA has superior antibacterial property as compared to SrBGF while demonstrating equal remineralisation ability. Furthermore, the modified SGIC showed promising results in reducing the cytotoxicity of hASCs and hDPSCs, indicating its potential for managing caries.

Detection of caries around restorations on bitewings using deep learning.

OBJECTIVE: Secondary caries lesions adjacent to restorations, a leading cause of restoration failure, require accurate diagnostic methods to ensure an optimal treatment outcome. Traditional diagnostic strategies rely on visual inspection complemented by radiographs. Recent advancements in artificial intelligence (AI), particularly deep learning, provide potential improvements in caries detection. This study aimed to develop a convolutional neural network (CNN)-based algorithm for detecting primary caries and secondary caries around restorations using bitewings. METHODS: Clinical data from 7 general dental practices in the Netherlands, comprising 425 bitewings of 383 patients, were utilized. The study used the Mask-RCNN architecture, for instance, segmentation, supported by the Swin Transformer backbone. After data augmentation, model training was performed through a ten-fold cross-validation. The diagnostic accuracy of the algorithm was evaluated by calculating the area under the Free-Response Receiver Operating Characteristics curve, sensitivity, precision, and F1 scores. RESULTS: The model achieved areas under FROC curves of 0.806 and 0.804, and F1-scores of 0.689 and 0.719 for primary and secondary caries detection, respectively. CONCLUSION: An accurate CNN-based automated system was developed to detect primary and secondary caries lesions on bitewings, highlighting a significant advancement in automated caries diagnostics. CLINICAL SIGNIFICANCE: An accurate algorithm that integrates the detection of both primary and secondary caries will permit the development of automated systems to aid clinicians in their daily clinical practice.

Volumetric analysis after caries excavation with caries detecting dyes and chemomechanical caries removal agents using 3D scanner-a randomised clinical trial.

AIM: This research aimed to use an extra-oral 3D scanner for conducting volumetric analysis after caries excavation using caries-detecting dyes and chemomechanical caries removal agents in individuals with occlusal and proximal carious lesions. METHODS: Patients with occlusal (A1, A2, A3) and proximal carious lesions (B1, B2, B3) were treated with the conventional rotary technique, caries detecting dyes (CDD) and chemomechanical caries removal (CMCR) method on 90 teeth (n = 45 for each). Group A1, B1: Excavation was performed using diamond points. Group A2, B2: CDD (Sable Seek™ caries indicator, Ultradent) was applied and left for 10 s, and then the cavity was rinsed and dried. For caries removal, diamond points or excavators were used. Group A3 and B3: BRIX3000 papain gel was applied with a micro-brush for 20 s and was activated for 2 min, and then the carious tissue was removed with a sharp spoon excavator. Post-excavation cavity volume analysis was performed using a 3D scanner. The time required and the verbal pain score (VPS) for pain were scored during excavation. Post-restoration evaluation was performed at 1, 3, and 6 months FDI (Federation Dentaire Internationale) criteria. RESULTS: Comparison of age, time and volume with study groups were made using Independent Sample' t' test and one-way analysis of variance (ANOVA) for two and more than two groups, respectively. Using Cohen's Kappa Statistics, evaluators 1 and 2 agreed on caries removal status aesthetic, functional and biological properties at different follow-ups. The chi-square test revealed that the rotary groups [A1(2.5 ± 0.4 min) B1(4.0 ± 0.4 min)] had significantly less (p = 0.000) mean procedural time than CDD [A2(4.5 ± 0.4 min) B2(5.7 ± 0.4 min)] and CMCR [A3(5.4 ± 0.7 min) B3(6.2 ± 0.6 min)] groups. The CMCR group showed better patient acceptance and less pain during caries excavation than the rotary and CDD groups. CMCR group showed significantly less mean caries excavated volume(p = 0.000). Evaluation of restoration after 1-, 3-, and 6-month intervals was acceptable for all the groups. CONCLUSION: Brix3000 helps effectively remove denatured teeth with less pain or sensitivity. The time required for caries removal was lowest in the rotary method and highest in the brix3000 group, while the volume of caries removed was the lowest for brix3000 and highest for the rotary group.

A scoping assessment of dental services at designated head and neck cancer centres in Ontario, Canada.

BACKGROUND: Dentists serve a crucial role in managing treatment complications for patients with head and neck cancer, including post-radiation caries and oral infection. To date, dental services for head and neck cancer patients in Ontario, Canada have not been well characterized and considerable disparities in allocation, availability, and funding are thought to exist. The current study aims to describe and assess the provision of dental services for head and neck cancer patients in Ontario. METHODS: A mixed methods scoping assessment was conducted. A purposive sample of dentist-in-chiefs at each of Ontario's 9 designated head and neck cancer centres (tertiary centres which meet provincially-set quality and safety standards) was invited to participate. Participants completed a 36-item online survey and 60-minute semi-structured interview which explored perceptions of dental services for head and neck cancer patients at their respective centres, including strengths, gaps, and inequities. If a centre did not have a dentist-in-chief, an alternative stakeholder who was knowledgeable on that centre's dental services participated instead. Thematic analysis of the interview data was completed using a mixed deductive-inductive approach. RESULTS: Survey questionnaires were completed at 7 of 9 designated centres. A publicly funded dental clinic was present at 5 centres, but only 2 centres provided automatic dental assessment for all patients. Survey data from 2 centres were not captured due to these centres' lack of active dental services. Qualitative interviews were conducted at 9 of 9 designated centres and elicited 3 themes: (1) lack of financial resources; (2) heterogeneity in dentistry care provision; and (3) gaps in the continuity of care. Participants noted concerning under-resourcing and limitations/restrictions in funding for dental services across Ontario, resulting in worse health outcomes for vulnerable patients. Extensive advocacy efforts by champions of dental services who have sought to mitigate current disparities in dentistry care were also described. CONCLUSIONS: Inequities exist in the provision of dental services for head and neck cancer patients in Ontario. Data from the current study will broaden the foundation for evidence-based decision-making on the allocation and funding of dental services by government health care agencies.

Longevity of dental restorations in Sjogren's disease patients using electronic dental and health record data.

BACKGROUND: Decreased salivary secretion is not only a risk factor for carious lesions in Sjögren's disease (SD) but also an indicator of deterioration of teeth with every restorative replacement. This study determined the longevity of direct dental restorations placed in patients with SD using matched electronic dental record (EDR) and electronic health record (EHR) data. METHODS: We conducted a retrospective cohort study using EDR and EHR data of Indiana University School of Dentistry patients who have a SD diagnosis in their EHR. Treatment history of patients during 15 years with SD (cases) and their matched controls with at least one direct dental restoration were retrieved from the EDR. Descriptive statistics summarized the study population characteristics. Cox regression models with random effects analyzed differences between cases and controls for time to direct restoration failure. Further the model explored the effect of covariates such as age, sex, race, dental insurance, medical insurance, medical diagnosis, medication use, preventive dental visits per year, and the number of tooth surfaces on time to restoration failure. RESULTS: At least one completed direct restoration was present for 102 cases and 42 controls resulting in a cohort of 144 patients' EDR and EHR data. The cases were distributed as 21 positives, 57 negatives, and 24 uncertain cases based on clinical findings. The average age was 56, about 93% were females, 54% were White, 74% had no dental insurance, 61% had public medical insurance, < 1 preventive dental visit per year, 94% used medications and 93% had a medical diagnosis that potentially causes dry mouth within the overall study cohort. About 529 direct dental restorations were present in cases with SD and 140 restorations in corresponding controls. Hazard ratios of 2.99 (1.48-6.03; p = 0.002) and 3.30 (1.49-7.31, p-value: 0.003) showed significantly decreased time to restoration failure among cases and positive for SD cases compared to controls, respectively. Except for the number of tooth surfaces, no other covariates had a significant influence on the survival time. CONCLUSION: Considering the rapid failure of dental restorations, appropriate post-treatment assessment, management, and evaluation should be implemented while planning restorative dental procedures among cases with SD. Since survival time is decreased with an increase in the number of surfaces, guidelines for restorative procedures should be formulated specifically for patients with SD.

What are the emerging trends in dental composite materials in permanent teeth with occlusal cavities: self-adhesive vs traditional?

DESIGN: The research is a systematic review and meta-analysis of randomized controlled trials (RCTs). AIM: The study aimed to compare the clinical outcomes of self-adhesive flowable composite resins (SAFCs) versus conventional flowable composite resins (FCs) used in occlusal cavity restorations in permanent teeth. METHODS: This research included a search for RCTs. Multiple databases were systematically searched for RCTs with a minimum 1-year follow-up comparing SAFCs to FCs. Outcomes evaluated were retention, secondary caries, marginal adaptation, marginal discoloration, and postoperative sensitivity based on modified USPHS criteria. Risk of bias was assessed using Cochrane RoB 2 tool. Random effects meta-analyses were conducted where applicable. Certainty of evidence was rated using GRADE approach. RESULTS: Five RCTs (four parallel and one split mouth) comprising 138 patients were included. During 1- and 2-year recalls, there were generally no significant differences in clinical performance between SAFCs and FCs. However, FCs applied using the etch-and-rinse technique demonstrated statistically better marginal adaptation at 2 years (3 studies, RR 3.21, 95% CI 1.50-6.83) and marginal discoloration (4 studies, RR 3.40, 95% CI 1.10-10.48). The overall quality of evidence ranged from low to moderate. CONCLUSIONS: SAFCs showed comparable short-term outcomes to FCs in treating occlusal cavities. Further high-quality RCTs with longer follow-up are warranted to confirm long-term performance of SAFCs. Use of separate enamel etching may improve marginal adaptation and discoloration with FCs.

The Evidence-practice Gap in Minimal Intervention Dentistry: An International Comparison Between Dentists in Japan and Brazil.

OBJECTIVES: This study was designed to: 1) evaluate and compare the evidence-practice gap (EPG) in minimal intervention dentistry (MID) in Japan and Brazil by measuring concordance between dentists' clinical practice and published evidence; and 2) identify dentists' factors associated with the EPG in both countries. METHODS: We performed a cross-sectional study using a web-delivered questionnaire among 136 Japanese and 110 Brazilian dentists. The questionnaire consisted of three questions concerning "restoration diagnosis and treatment," "deep caries diagnosis and treatment," and "caries risk assessment" regarding MID. A chi-square test was used to analyze differences in concordance among clinical practice and evidence from the literature between Japanese and Brazilian dentists. Logistic regression analyses were performed to analyze dentists' factors associated with overall concordance for all three questions. RESULTS: Overall concordance was significantly higher in Brazil (55%) than in Japan (38%) (p<0.01). Concerning how evidence was obtained, textbooks, nonacademic journals, and seminars and workshops were used as information sources more frequently by Japanese than Brazilian dentists (p<0.001), whereas scientific journal articles in English were used more frequently by Brazilian dentists (p<0.001). On logistic regression analysis, overall concordance was higher for Japanese dentists who frequently obtained evidence from scientific journal articles in English (p<0.05), whereas Brazilian dentists who frequently obtained evidence from the Internet were associated with lower overall concordance (p<0.05). CONCLUSIONS: Because overall concordance was significantly higher in Brazil than in Japan, Japan may have a greater EPG in MID practice. Specific characteristics of Japanese and Brazilian dentists showed significant associations with overall concordance.

In vitro remineralization by various ion-releasing materials of artificially demineralized dentin: A micro-CT study.

OBJECTIVE: The aim of this study was to evaluate the remineralizing properties of ion-releasing restorative materials on pH cycling-induced carious dentin. METHODS: Fifty sound molars were freshly extracted. The occlusal surfaces were abraded using water-cooled sandpaper (800 grit). The residual crowns were embedded in self-cured acrylic resin with the flat dentin surface exposed. A mesio-distal trench was created using a calibrated 0.5 mm deep occlusal reduction burr, and artificial dentin caries were generated by pH cycling. Then, teeth were randomly assigned to five groups according to the ion-releasing material used. For each sample, micro-CT acquisitions were performed at various intervals. Remineralization was assessed by mean gray value (MGV) measurements after registration and segmentation of the region of interest with 3D Slicer software. One-way repeated-measures ANOVA followed by Tukey's post hoc test was used to investigate the difference in MGVs among the various groups. RESULTS: Only Cention Forte showed significantly increased MGVs after 4 weeks compared to demineralized dentin. MGVs were higher, but not significantly, after placement of the restorative materials, including in the resin composite control group. These results can be explained by the radiopacity of the materials. SIGNIFICANCE: Cention Forte, the material with the highest radiopacity, showed a significant increase in the MGVs of artificially carious dentin after 4 weeks. However, the study of dentin remineralization by micro-CT could be impacted by the radiopacity of the restorative materials used. The relevance of this examination for the study of dentinal remineralization should be investigated.

Clinical Investigation of the Inhibitory Effects of Tooth-Coating Materials on Initial Active Root Caries: A Pilot Randomized Controlled Trial.

Background and Objectives: Caredyne ZIF-C is a novel, capsule-mixed zinc-containing prototype glass ionomer cement (GIC). Zinc ions are reported to inhibit root dentin demineralization, dentin collagen degradation, bacterial growth, acid production, and in vitro bacterial biofilm formation. However, the effectiveness of GICs against initial root caries lesions is unclear. Therefore, this study aimed to evaluate the efficacy of GICs, especially the new zinc-containing Caredyne ZIF-C GIC, as tooth-coating materials in patients with initial active root caries. Materials and Methods: A total of 58 lesions in 47 older adults (age > 65 years) were randomly allocated to one of the following three groups: Caredyne ZIF-C, Fuji VII (a conventional GIC), and sodium fluoride (NaF). All the lesions were treated with the assigned materials without removing the infected dentin, and the rates of dental plaque attachment and coating material fall-out were evaluated after 3, 6, and 12 months. The failure rate was defined as the number of teeth that needed restoration due to caries progression. Results: The plaque attachment rates tended to be lower in the material-coated root surfaces than in the healthy exposed root surfaces after 3, 6, and 12 months, although the differences among the three groups were not significant. Moreover, the coating material fall-out rate tended to be lower in the Caredyne ZIF-C group than in the Fuji VII group. There was no significant difference in the failure rate among the three groups at the 12 months mark. Conclusions: Though this pilot study offers a new direction for suppressing the progression of initial active root caries by controlling plaque attachment using GICs including Caredyne ZIF-C, clinical studies with a larger sample size are needed.

In vitro remineralization of adjacent interproximal enamel carious lesions in primary molars using a bioactive bulk-fill composite.

BACKGROUND: Surface remineralization is recommended for the management of active non-cavitated interproximal carious lesions in primary teeth. According to the American Academy of Pediatric Dentistry, a recently recognized category of materials called bioactive restorative materials can be used for remineralization. This study aimed to evaluate the release of fluoride (F), calcium (Ca) and phosphate (P) ions from Predicta® Bioactive Bulk-fill composite compared with EQUIA Forte® and Filtek™ Z350 and to determine the remineralization effect of these 3 restorative materials on adjacent initial interproximal enamel carious lesions. METHODS: The release of F, Ca and P ions from 3 groups ((n = 10/group) (Group 1- Predicta®, Group 2- EQUIA Forte® and Group 3- Filtek™ Z350)) was determined at 1st, 4th, 7th and 14th days. After creating artificial carious lesions, human enamel samples were randomly assigned into 3 groups (n = 13/group) which were placed in contact with occluso-proximal restorative materials and exposed to a 14-day pH cycling period. Surface microhardness was determined using a Knoop microhardness assay at baseline, after artificial carious lesions formation and after pH cycling. The difference in the percentage of surface microhardness recovery (%SMHR) among groups was compared. Mineral deposition was analyzed with energy-dispersive x-ray spectroscopy (EDS) and the enamel surface morphology was evaluated with scanning electron microscopy (SEM). Kruskal-Wallis's test with Dunn's post hoc test and one-way ANOVA with Tukey's post hoc test were used for data analysis. RESULTS: EQUIA Forte® released the highest cumulative amount of F and P ions, followed by Predicta® and Filtek™ Z350. Predicta® released higher amount of Ca ions than EQUIA Forte® and Filtek™ Z350. Predicta® demonstrated the highest %SMHR, followed by EQUIA Forte® and Filtek™ Z350. There was a significant difference in the %SMHR between Predicta® and Filtek™ Z350 (p < 0.05). However, EQUIA Forte® demonstrated the highest fluoride content, followed by Predicta® and Filtek™ Z350. The SEM images of EQUIA Forte® and Predicta® revealed the greater mineral deposition. CONCLUSION: Predicta® demonstrated a marked increase in surface microhardness and fluoride content of adjacent initial interproximal enamel carious lesions in primary molars compared with Filtek™ Z350. Predicta® is an alternative restorative material to remineralize adjacent initial interproximal enamel carious lesions in primary molars, especially in high-risk caries patients.

The use of rubber dam in the survival of RMGIC restorations in primary molars: a 30-month randomized controlled clinical trial.

This study was a randomized controlled clinical trial with two parallel arms and the objective was to compare the survival of resin modified glass ionomer (RMGIC) restorations in primary teeth using rubber dam or cotton roll isolation after a 30-month follow-up period. Ninety-two children (mean age 6.8 ± 1.37) and 200 primary molars with occlusal or occluso-proximal cavitated dentin caries lesions were randomly assigned into two groups: cotton rolls and rubber dam. All lesions were restored using RMGIC (RIVA Light Cure) after selective caries removal. Restorative failure and lesion arrestment were evaluated by two independent, trained, and calibrated examiners through clinical and radiographic examinations. The Kaplan-Meier test was used to assess the survival of restorations and Cox regression was used to assess the association of risk factors with restorative failure. There was no significant difference in survival rates between groups (p = 0.17). Older age (HR = 2.81 [95%CI: 1.47-5.44]) and higher rate of gingival bleeding (HR = 0.47 [95%CI: 0.23-0.99]) were associated with restorative failure. No patient had painful symptoms, pulp outcomes, or radiographic changes compatible with lesion progression. The use of rubber dam isolation did not increase the survival rate of occlusal and occluso-proximal restorations using RMGIC in primary molars after 30 months of follow-up. Since the survival is not influenced by the type of isolation, the professional can safely choose the appropriate technique for each case, considering his experience and preferences, as well as those of the patient.

Clinical performance of a glass-hybrid system in comparison with a resin composite in two-surface class II restorations: a 5-year randomised multi-centre study.

OBJECTIVE: To evaluate the 5-year clinical performance of a glass hybrid restorative system and a nano-hybrid resin composite in moderate to large two-surface class II cavities. MATERIALS AND METHODS: This study was carried out by dental schools in Zagreb, Croatia; Izmir, Turkey; Belgrade, Serbia; and Milan, Italy. A total of 180 patients requiring two class-II two-surface restorations in the molars of the same jaw were recruited. The teeth were randomly restored with either a nano-hybrid resin composite (Tetric EvoCeram, Ivoclar Vivadent) or a glass-hybrid material (EQUIA Forte, GC). During the 5-year follow-up, two calibrated evaluators at each centre scored the restorations annually using the FDI-2 scoring system. The survival rates were calculated using the Kaplan-Meier method and compared using non-parametric matched pair tests (p < 0.05). RESULTS: There were no statistically significant differences between the overall survival and success rates of the two types of restorations (p>0.05). The success rates (FDI-2 scores 1-3) for EQUIA Forte were 81.9% (average annual failure rate: 3.9%) and 90.7% for Tetric EvoCeram (average annual failure rate: 1.9%). The survival rates (FDI-2 scores 1-4) for EQUIA Forte and Tetric EvoCeram were 94.5% and 94.4%, respectively, with an average annual failure rate of 1.1%. CONCLUSIONS: In terms of success and survival rates, both the glass-hybrid restorative system and the nano-hybrid resin composite have been shown to perform satisfactorily. CLINICAL RELEVANCE: The results of this study indicate that EQUIA Forte can be one of the therapeutic options for moderate to large two-surface class II restorations of posterior teeth.